Defective Latte Panda

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:

    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    Posts: 6
    Joined: Tue May 31, 2016 10:33 pm

    Tue May 31, 2016 10:44 pm

    Think I got a defective one. Using the power supply that cane in the box, kept rebooting during the setup. Got very warm and now, the red LED only comes on VERY dim and never goes out and the Panda will NOT boot.

    Anyone know how to get their attention?

    User avatar
    Site Admin
    Posts: 42
    Joined: Sun Apr 17, 2016 11:21 am

    Wed Jun 01, 2016 5:03 am

    How about the usb cable? It looks like the LP doesn't have enough current.
    Drink Latte, Enjoy Coding, Stay overnight, Be a LattePanda.

    User avatar
    Posts: 6
    Joined: Tue May 31, 2016 10:33 pm

    Thu Jun 02, 2016 12:26 am

    Using the PS and cable supplied in my shipment. Board is now a brick. No response from the company.

    User avatar
    Posts: 6
    Joined: Tue May 31, 2016 10:33 pm

    Fri Jun 03, 2016 2:13 am

    I have opened a ticket with KickStarter try to get the developers attention.

    User avatar
    Site Admin
    Posts: 2697
    Joined: Wed Jan 20, 2016 9:09 am

    Wed Mar 29, 2017 9:45 am

    Thanks for your feedback.
    Enjoy Tinkering with LattePanda ! :lol:

    User avatar
    Posts: 1
    Joined: Mon Sep 07, 2020 8:42 am

    Mon Sep 07, 2020 9:37 pm

    Thanks, you have pointed out some excellent points, i as well believe this is a very superb website.
    This is actually the kind of information i have been trying to find.
    Thank you for writing this information.

    Post Reply