Auto Power On issue

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    leva
    Posts: 4
    Joined: Thu Mar 07, 2019 6:52 pm

    Wed Sep 30, 2020 2:55 pm

    Hello!
    I have LattePanda 4/64 X-S70CR200-CC55G-ENT-193200263
    I have connected RTC battery, have enabled Power On feature in BIOS.

    Sometimes when I connect PC to power it didn't start. I tried a lot of time to disconnect-connect to power and it didn't start.
    Then I push power button and the PC is start. Then I test it a lot of time to power on. It can start, but again after some time of attempts the PC stopped to start.

    So I don't know what to do with PC to get stable Power On feature. Please help.

    BIOS
    Core version 5.011
    Project Version S70CR200 3.05 x64
    Build data and time 05/15/2018 16:29:53

    User avatar
    leva
    Posts: 4
    Joined: Thu Mar 07, 2019 6:52 pm

    Thu Oct 01, 2020 10:26 am

    One more thing
    Clock is BIOS in System Time hangs. And seems like BIOS lock time.

    Post Reply