Flatte Panda - low profile LP case

A place to showcase LattePanda creations!
Post Reply
User avatar
Posts: 1
Joined: Thu Aug 10, 2017 9:29 pm

Thu Aug 10, 2017 9:38 pm

Hi, I've designed a flat case for my LattePanda. It's only 13mm thick and requires you to get rid of some of the components from the board (double usb port, ethernet port, sensor connectors). The benefit is that you get a very thin case you can put in your pocket with all remaining ports available. Unfortunately I was not able to desolder the ports (I've tried with 450*C soldering iron) so I had to rip them apart.


I needed something I could hold in my pocket and power from a single 18650 battery. I will make a battery attachment for this case pretty soon. My aim is to build a powerful portable computer for my video analysis project and LP was perfect but a little bit to thick.

Here is the design of the case for 3d printing:
You can print it yourself or order a print from any known 3d printing services near you.

Cheers! :D

User avatar
Posts: 24
Joined: Thu May 04, 2017 4:30 am

Thu Aug 17, 2017 9:50 pm

My project required a thinner LattePanda. I hope, when we order in volume, we can have them delivered without USB sockets.

I have both cut them off with clippers and desoldered them (using a Hot Air Station). Cutting them is MUCH easier. Using the Hot Air Station, heat the metal socket housings, not the PCB. Eventually they'll be easy enough to pull off.

User avatar
Posts: 6
Joined: Fri Oct 19, 2018 3:28 am

Fri Oct 19, 2018 3:54 am

Would you help me creating a Case for my lattepanda Alpha I have tried multiple times with fusion 360 but I have fail I can provide you with the STL of the board for reference and the stp file.

Stl file


This is the stp file


Post Reply