Beta Ubuntu Image for LattePanda - Official version

General Info and Announcements from the LatteTeam and Distributors
User avatar
LattePanda
Site Admin
Posts: 2446
Joined: Wed Jan 20, 2016 9:09 am

Wed Nov 21, 2018 9:37 pm

MIPS architecture wrote:
Mon Nov 19, 2018 2:09 pm
I know that LattePanda is for windows... However, they said that "Ubuntu version will be released in 2 weeks..." 2 month ago.....
If they didn't say about it. nevermind...

They have to say something,,,, for example, we are not able to develop ubuntu version... Sorry....
I think that they developed new Alpha series, so they don't care about the old one.... so I am upset... SAY SOMETHING OFFICIALLY!!!
Dear friend, please just go with community contributed version, which is also really go for 4G model -https://github.com/mopplayer/lattepanda-mainline-4.11
Enjoy Tinkering with LattePanda ! :lol:

User avatar
bsniego
Posts: 1
Joined: Tue Dec 25, 2018 5:33 pm

Tue Dec 25, 2018 6:26 pm

Today I completed my Dual Boot configuration of my LattePanda Alpha, I am now running the pre-configured Windows 10 alongside Ubuntu 18.04. For some reason I expected the worse, I added a 500Gb SSD to the M.2 slot, formatting 100gb as shared data NTFS leaving the remaining free. Following the dual boot steps in this post https://www.itzgeek.com/how-tos/linux/u ... -boot.html i walked through step by step mostly only changing the partition sizes.

The results... an extremely fast and responsive dual boot Panda Alpha. I have not tested the wifi or other extended board feature, but basic functionality, mouse, keyboard, graphics and network are working. I added a 3D printed case and so far i am impressed, time to start some software projects.

User avatar
LattePanda
Site Admin
Posts: 2446
Joined: Wed Jan 20, 2016 9:09 am

Mon Jan 07, 2019 12:05 pm

bsniego wrote:
Tue Dec 25, 2018 6:26 pm
Today I completed my Dual Boot configuration of my LattePanda Alpha, I am now running the pre-configured Windows 10 alongside Ubuntu 18.04. For some reason I expected the worse, I added a 500Gb SSD to the M.2 slot, formatting 100gb as shared data NTFS leaving the remaining free. Following the dual boot steps in this post https://www.itzgeek.com/how-tos/linux/u ... -boot.html i walked through step by step mostly only changing the partition sizes.

The results... an extremely fast and responsive dual boot Panda Alpha. I have not tested the wifi or other extended board feature, but basic functionality, mouse, keyboard, graphics and network are working. I added a 3D printed case and so far i am impressed, time to start some software projects.
Would you mind to share more details about this Alpha configuration via github docs repo? Thanks for your support!
http://docs.lattepanda.com/content/alpha_edition/os/
https://github.com/LattePandaTeam/Docs
Enjoy Tinkering with LattePanda ! :lol:

User avatar
Rehanakhan
Posts: 1
Joined: Mon Jan 14, 2019 6:51 am

Mon Jan 14, 2019 6:53 am

To a mind-blowing degree venerated looking at your blog. It was to an unprecedented degree particularly made and clear. A dedication of gratefulness is all together for your unimaginable effort and I was sitting tight for this post. Jaipur Call Girls I am satisfied to examine this kind of astonishing illuminating post.

User avatar
aliyaarora
Posts: 1
Joined: Mon Jan 14, 2019 12:05 pm

Mon Jan 14, 2019 12:08 pm

For a mind blowing degree to see your blog. It was an unprecedented degree specially built and clear. A dedication of gratitude is all together for your Bangalore Escorts unimaginable effort and I was tight for this post. I am happy to investigate such astonishing shocking post.

User avatar
firxworx
Posts: 1
Joined: Tue Jan 15, 2019 6:33 pm

Tue Jan 15, 2019 9:47 pm

Just for fun I tried an 18.04 minimal install on a 2/32 and it failed miserably. The installer worked, but during the final install process I started getting CPU lockup issues and alerts from the watchdog e.g.:

Soft lockup CPU#1 stuck for 22s

It would happen to other CPU's as well.

For cooling in the time being, I had a table-top size fan pointed at the top of the unit.
I'm using a reliable power supply, a 2.5A 5V that was previously powering my raspberry pi.

User avatar
uztako
Posts: 2
Joined: Tue Jul 03, 2018 2:06 pm

Tue Jan 29, 2019 11:43 pm

pufff linux version does not work properly.
I have 4 pcs / 64gb in my hand.
I didn't know what to do.
I think I'll be back to the tinker board :((((

User avatar
phinicota
Posts: 2
Joined: Wed Jan 23, 2019 5:08 pm

Mon Feb 04, 2019 7:35 pm

firxworx wrote:
Tue Jan 15, 2019 9:47 pm
Just for fun I tried an 18.04 minimal install on a 2/32 and it failed miserably. The installer worked, but during the final install process I started getting CPU lockup issues and alerts from the watchdog e.g.:

Soft lockup CPU#1 stuck for 22s

It would happen to other CPU's as well.

For cooling in the time being, I had a table-top size fan pointed at the top of the unit.
I'm using a reliable power supply, a 2.5A 5V that was previously powering my raspberry pi.
I installed ubuntu 18.04 on a lattepanda alpha and haven't noticed any issues so far, how do you check for lockups?
BTW, 2.5A-5V (12.5W) seems waay too low for the alpha, the packed power supply is rated 45W.

edit: I just realized you weren't talking about the lattepanda alpha, sorry.

User avatar
Raymond Day
Posts: 37
Joined: Mon Apr 18, 2016 12:48 pm

Mon Feb 11, 2019 10:30 am

Yes they should do a server too. That's how I am running mine now.

User avatar
fender90
Posts: 15
Joined: Tue Apr 04, 2017 2:14 pm

Thu Mar 07, 2019 3:31 pm

Any chances that after official Ubuntu image there will be an official Android build?

Post Reply