I need lattePanda's BIOS help.

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    [elevision]
    Posts: 1
    Joined: Wed Nov 18, 2020 3:31 pm

    Wed Nov 18, 2020 3:52 pm

    Hi. Thank you.
    I would like to receive the latest BOIS of the product we purchased.
    Check the product model number (see picture).

    Please give me some advice on the functions I need.
    There are two functions that we want.
    First, boot after entering power without start button
    Second, do not use recovery function after power shutdown like Linux

    I need these two functions.
    Thank you in advance.
    Attachments
    KakaoTalk_20201118_231851687.jpg
    KakaoTalk_20201118_231851687.jpg (174.65 KiB) Viewed 797 times
    KakaoTalk_20201118_231746314.jpg
    KakaoTalk_20201118_231746314.jpg (119.91 KiB) Viewed 797 times

    User avatar
    LattePanda
    Site Admin
    Posts: 2720
    Joined: Wed Jan 20, 2016 9:09 am

    Fri Nov 20, 2020 5:37 am

    Hi, pls check reply below.
    1. boot after entering power without start button
    Here is the tutorial to set auto-boot function.
    https://github.com/LattePandaTeam/Latte ... -lp-v11v12

    2. Disable Recovery function
    Do you mean the windows recovery page after sudden power shutdown? It's the Windows self-checking procedure, not LattePanda function.
    Enjoy Tinkering with LattePanda ! :lol:

    Post Reply