[DISCUSSION] Fans/Heatsinks/CPU Cooling Mods

A place to talk about all the Operating Systems, Software & Hardware
Forum rules

- Posts are to be made in the relevant forum. Users are asked to read the forum descriptions before posting.

- Members should post in a way which is consistent with "normal writing". That is users should not post excessive numbers of emoticons, large, small or coloured text, etc. Similarly users should not SHOUT or use excessive punctuation (e.g. ! and ?) in topic titles or posts.

- Members should use an appropriate, descriptive subject when posting a new topic. Examples of bad subjects include; "Help me!", "I'm stuck!", "I've got an error!", etc. Examples of good subjects include; "Getting an TABLE FULL error upon login", "Cannot restore a backup".

- Members are asked to post in English only so that posts can be well received and properly monitored.

- Spam is not tolerated here under any circumstance. This includes offering hosting services (charged and free), installation services, solicitation etc. Recruiting members for your own projects (moderators, designers, professional MOD work, etc.) is not permitted and is also considered spam. Users posting spam will be warned and their post removed.

- Members should post in a way that is respectful of other users. Flaming or abusing users in any way will not be tolerated and will lead to a warning. Vulgar language and inappropriate material is not allowed and will be removed. We try to maintain a family friendly atmosphere whenever it is possible within the main subject matter of this community. Please keep this in mind when participating.

- Each user is allowed to create one account. If you would like to change your username, please contact us and, most likely, we can do it for you while you can keep all of your profile data, posts, and other content.

- If a user violates our guidelines and shows a disregard for them, our staff and our community, they run the risk of losing their account. We reserve the right to deactivate any account and to edit or remove any content without warning. These guidelines are subject to change at any time without notice.

Thank you for visiting LattePanda.com!
Post Reply
User avatar
cmoetzing
Posts: 17
Joined: Sat May 28, 2016 3:30 pm

Tue May 31, 2016 3:58 pm

How are your temps without the fan?

User avatar
hoppertw
Posts: 6
Joined: Sun May 29, 2016 8:57 am

Tue May 31, 2016 4:45 pm

Heat sink is a passive cooler. Fan is active cooler. The best cooler is active plus passive and the bad one is only the passive cooler. I stop the fan and try 95% to 100% loading for over 20 minutes. All the 4 cores run above 70C to 75C. In fact, the cooler effect using both is near the product but not the sum.
NOFAN.jpg
NOFAN.jpg (71.22 KiB) Viewed 9792 times

User avatar
cmoetzing
Posts: 17
Joined: Sat May 28, 2016 3:30 pm

Tue May 31, 2016 7:38 pm

Thx, I think passive will work for me. Cant wait until my heat sinks arrive.

User avatar
eldaria
Posts: 7
Joined: Tue May 24, 2016 8:22 pm

Tue May 31, 2016 10:53 pm

So been running it for a few hours, ambient temperature 27C, It seems stuck on 480MHz.
Tried to reboot, but it won't go up.

So I shut it down, and after an hour, I turned it back on.
Now it runs at 1840MHz, but quickly drops, and after just 10 minutes i'm again stuck on 480Mhz.

I'm using the acrylic case.
I have seen a few people adding cooling, is that really needed?

User avatar
tony359
Posts: 132
Joined: Tue May 24, 2016 5:52 pm

Tue May 31, 2016 10:59 pm

can you check the temperature of your CPU? You can use HWmonitor http://www.cpuid.com/softwares/hwmonitor.html
My LP with 20°C reaches 80°C and it's not in a case. I reckon a case would be a problem with 20°C, not to mention 27°C.

User avatar
michaelvdb
Posts: 3
Joined: Mon May 30, 2016 6:17 am

Wed Jun 01, 2016 3:30 am

Putting a few rasberry pi heatsinks copper and/or aluminum ones does a lot of good for heat dissipation.
In my office (say 24 degrees), LP peaks (in case) at about 75 degrees.
At home (27-30 degrees), LP peaks about 85degrees at full load. With a simple 5v fan belowing into the bottom, it runs at 44(idle) - 75(full load)

User avatar
trygame901
Posts: 22
Joined: Wed Jun 01, 2016 6:11 am

Wed Jun 01, 2016 7:31 am

Are you looking at the clock speed while idle or under load? While idle it will clock way down to save power and then when there is a load it will clock up. After while that the CPU starts to heat up it will start to clock down again. I ran mine at 100% load for 24hrs and in the end it was running ~.7ghz. The only time I ever saw 480 was while its idle.

User avatar
tony359
Posts: 132
Joined: Tue May 24, 2016 5:52 pm

Wed Jun 01, 2016 8:42 am

good point, the Cherry Trail will automatically throttle the speed depending on load. It's very normal that it sits at 480Mhz when idle.

User avatar
drussell1234
Posts: 1
Joined: Wed Jun 01, 2016 6:29 pm

Wed Jun 01, 2016 6:39 pm

Does anyone know if we could use the CN2 connector to power the Board?
Looks like you could plug 5v directly into the cn2 jumpers on the motherboard to supply power to the system?
Without a Board Schematic, I am unwilling to try it! Hopefully one of the developers of the board can answer this question. It would be easy to get more amperage to the board thru this connector vs the micro USB.

Thanks,
drussell1234

User avatar
fgaine
Posts: 12
Joined: Sat May 21, 2016 11:30 am

Thu Jun 02, 2016 8:53 am

LatteROFLCOPTER wrote:OK so I decided to install some mini heatsinks to see what happens.
While the LP has been stable for me, I'm not too happy with the high temps especially since it hasn't been hot weather.

The 'shield' (Really a Heat Spreader) will conduct the heat from the processor and spread it out over a larger surface area which is a good thing. Because of this, I decided to install the mini heatsinks directly on to the spreader.

I have some copper ones (commonly used on RPi) and an aluminium one, now as we all know copper is a much better conductor for heat. I still decided to use the aluminium one as it should at the very least help (I used one in my router which was overheating, and ever since there hasn't been any issues).

I also have the LP sitting on a small fan which is powered by USB (it's very quiet).
I don't quite understand how a fan underneath the case dissipates the heat. Is it blowing cold air inside the case or trying to absorb the hot air from the inside?

Post Reply