LattePanda Forum

Yes it should be possible within reason. i believe its a 30pin 0.5mm pitch cable. https://www.ebay.com/itm/162768952020 As for the touchscreen, you can find extensions for those too. Just know the pitch (distance between pads) and the number of "pins". Not sure how many there are for the touch scree...

DirectX 12 (FL 11_1), Shader 5.0 So it will take advantage of some optimizations made for directx 12. IE if you're using the dolphin emulator, if you go way back you can get a directx 12 version. Since the intel hd graphics 400, doesn't support vulkan in windows, only in special builds of linux. htt...

Ambient temps are the temps in your room. as for the panda itself.. put a heatsink and fan on it, or at least a heatsink at bare minimum. It gets hot. real hot.

You'd have to look for bluetooth stack software that has audio input. this.. isn't easy, i tried it once years ago with another computer, but never managed to get it working. since computers like to host, meaning they are the transmitter, not the receiver.

SATA can only be added with USB to SATA adapters, or a usb enclosure. I got about 450MB/s using an SATA SSD in a usb 3.0 enclosure. BUT, and here's the catch.. there's latencies added to this. the IOPs are kinda low. so for an SSD that should get about 100k'ish. it was getting 1-8k iops. So if you n...

I disabled the intel graphic display adapter in windows 10 system settings and LCD backlight comes ON and videoboard turned to green. No image yet though What do you mean you disabled the intel graphic display adapter? That IS the video output... if you turn that off, you have no video output.. at ...

Sorry Paul won't work. The Lattepanda doesn't have much in the way of native GPIOs, there are a couple that connect to the atom, but that isn't what you're looking for. The GPIOs on the lattepanda come from the onboard Arduino Leonardo. But it's still just an arduino. So if you were hoping to use li...

I've had the panda at 2560x1080@75hz, though it doesn't save the refresh and defaults to my monitor's default of 60hz (Overclocked the refresh to 75hz) Wow. What's your display or monitor? LG 25UM56-P it's a 25" 21:9 ultrawide 60hz. However there is an extremely similar LG25UM58-P which has a defau...

I've had the panda at 2560x1080@75hz, though it doesn't save the refresh and defaults to my monitor's default of 60hz (Overclocked the refresh to 75hz)

This is not an easy to fix problem. Since you need it to remain powered for a short time after the car is off. I can give you a solution if you aren't using Auto-On, with the panda, but you'll still need to use a power button to start it up. But it'll turn off automatically. But if you have it set t...