Search found 51 matches

by strawberrymaker
Sat May 21, 2016 4:31 pm
Forum: Troubleshooting
Topic: Panda not booting after BIOS flash
Replies: 2
Views: 2641

Panda not booting after BIOS flash

So i just updated the BIOS to autostart on powerup. and now it wont boot up at all. no signal on my panda screen
by strawberrymaker
Sat May 21, 2016 4:19 pm
Forum: Technical Discussion
Topic: Charger NOT EQUAL with Power Suppy
Replies: 14
Views: 7953

Re: Charger NOT EQUAL with Power Suppy

Or i would guess that you can use that little 4 pin header named CN2 for powering.
by strawberrymaker
Sat May 21, 2016 4:18 pm
Forum: Technical Discussion
Topic: Detail description of connectors
Replies: 9
Views: 5106

Re: Detail description of connectors

They could release a part of the circuitry and just leave the atom processor circuitry out of the schematic as they probably use a licensed circuitry to drive the atom so they cant release that one
by strawberrymaker
Sat May 21, 2016 4:02 pm
Forum: Technical Discussion
Topic: Boot from USB drive?
Replies: 9
Views: 6282

Re: Boot from USB drive?

Which USB Port did you used?If you tried the USB 2.0 Port try the USB 3.0 Port or vise versa
by strawberrymaker
Sat May 21, 2016 4:01 pm
Forum: Technical Discussion
Topic: Lattepanda 4GB/64GB model not starting + no display
Replies: 3
Views: 2384

Re: Lattepanda 4GB/64GB model not starting + no display

1. Plug the power in. 2. there should be a blue LED fading and a red led constantly being on now. 3. wait for the fading blue led to stop fading. 4.press the small angled button next to the GPIO of the Arduino (the middle buttton, not the outer ones) for more than a second and release it then. 5.???...
by strawberrymaker
Sat May 21, 2016 2:36 am
Forum: Technical Discussion
Topic: Detail description of connectors
Replies: 9
Views: 5106

Re: Detail description of connectors

Sadly its not really open source hardware, so getting knowledge of the connections would be a dream.
by strawberrymaker
Sat May 21, 2016 2:34 am
Forum: Technical Discussion
Topic: Mysterious button
Replies: 2
Views: 2201

Re: Mysterious button

Arduino Leonardo Reset :)
by strawberrymaker
Sat May 21, 2016 2:34 am
Forum: Technical Discussion
Topic: Charger NOT EQUAL with Power Suppy
Replies: 14
Views: 7953

Re: Charger NOT EQUAL with Power Suppy

you could just rip an old micro usb cable apart and plug it into the panda, grap a multimeter and test the continuity. but from what ive seen on the panda there wasnt any kind of isolation
by strawberrymaker
Sat May 21, 2016 2:30 am
Forum: Technical Discussion
Topic: Boot from USB drive?
Replies: 9
Views: 6282

Re: Boot from USB drive?

Via the BIOS / boot select. Plug your USB Drive in, start the panda and spam f7 on your keyboard. then you can select your usb drive
by strawberrymaker
Sat May 21, 2016 2:29 am
Forum: Technical Discussion
Topic: Enhanced Edition - no wireless AC?
Replies: 11
Views: 6494

Re: Enhanced Edition - no wireless AC?

Can maybe someone remove the rf can and write which chip is under it?