Search found 37 matches

by ChicagoBob123
Mon Oct 09, 2017 8:32 pm
Forum: Troubleshooting
Topic: Adding the Touch Screen
Replies: 20
Views: 11823

Re: Adding the Touch Screen

I could not get the 32bit OS to load. I think it has something to do with the BIOS>
by ChicagoBob123
Fri Oct 06, 2017 3:54 pm
Forum: Troubleshooting
Topic: Getting the touch screen and Panel connector replaced.
Replies: 7
Views: 3542

Getting the touch screen and Panel connector replaced.

These things are way to delicate. Even being careful the actuator came off after 3 uses.
Do you service this or is there anyone or replace these?
by ChicagoBob123
Fri Oct 06, 2017 3:47 pm
Forum: Technical Discussion
Topic: How to Extend the 7" screen and touch screen cables?
Replies: 9
Views: 7357

Re: How to Extend the 7" screen and touch screen cables?

If you are going to be that far away from the Panda I would recommend going with a USB and HDMI mini monitor. The connections on that 7 inch screen are crap anyway and I currently have a paper clip holding my connection on because the flap broke off after 3 uses.
by ChicagoBob123
Mon Oct 02, 2017 4:09 pm
Forum: Troubleshooting
Topic: Adding the Touch Screen
Replies: 20
Views: 11823

Re: Adding the Touch Screen

Found out the hard way the Latest SC70CR200 2GB+32GB is not compatible with touch screen drivers. This latest version of the board has windows 10 64 bit not 32 bit even though it only has 2GB of memory. I reloaded the OS and started from scratch with the board nothing. I do have two boards I was abl...
by ChicagoBob123
Mon Oct 02, 2017 3:38 pm
Forum: Technical Discussion
Topic: Latest SC70CR200 2GB+32GB not compatible with touch screen
Replies: 2
Views: 1694

Latest SC70CR200 2GB+32GB not compatible with touch screen

I have 2 2GB/32GB Windows 10 enabled Latte Pandas bought a few weeks apart. The latest board is a SC70CR20 and oddly has a 64 bit windows 10 OS on it not the 32bit Windows 10 OS. Also the Touch screen driver does not work on the SC70CR20 Panda board at all. The pad did work on the slightly older 2GB...
by ChicagoBob123
Mon Oct 02, 2017 2:01 pm
Forum: General Discussion
Topic: Video and Touch panel connectors to delicate.
Replies: 1
Views: 2595

Video and Touch panel connectors to delicate.

I have to panda boards and both now have broken connectors when trying to install a touch screen after I already had the monitor. To install the Touch Screen I removed the panel, this was a mistake. The tiny fragile connector came off even though I used very little force to open it. So I tried the o...
by ChicagoBob123
Mon Sep 25, 2017 7:33 pm
Forum: Troubleshooting
Topic: Adding the Touch Screen
Replies: 20
Views: 11823

Adding the Touch Screen

I have a Panda and bought the screen. It was working very well but now I wanted to have the touch screen. Well that was bad for me. Its NOT working. I ordered the panel from DF Robots and Its not working at all and like an idiot already glued it onto my screen which is working. Is it possible I miss...
by ChicagoBob123
Mon Aug 28, 2017 9:44 pm
Forum: Technical Discussion
Topic: Serial Communication - LattePanda Leonardo [SOLVED]
Replies: 28
Views: 20088

Re: Serial Communication - LattePanda CPU and Onboard Arduin

This is my initialization code in C# I initialize with two threads read and write. public AdruinoIO(ApplicationSettings ap) { serialPort = new SerialPort(ap.adruinoComPort, 115200, Parity.None, 8, StopBits.One); serialPort.Handshake = Handshake.None; serialPort.DtrEnable = true; Thread readThread = ...
by ChicagoBob123
Mon Aug 28, 2017 2:21 pm
Forum: Technical Discussion
Topic: Serial Communication - LattePanda Leonardo [SOLVED]
Replies: 28
Views: 20088

Re: Serial Communication - LattePanda CPU and Onboard Arduin

Yes make sure its Leonardo and write it to the Arduino and please let everyone know if its OK or not.
by ChicagoBob123
Sat Aug 26, 2017 10:08 pm
Forum: Technical Discussion
Topic: Serial Communication - LattePanda Leonardo [SOLVED]
Replies: 28
Views: 20088

Re: Serial Communication - LattePanda CPU and Onboard Arduin

On the Arduino side you need to read the serial data then you can act on it. On the C# side you need to pick the right com port and send the data to the board. The baud rate is set on the Arduino side when you set up reading the serial loop. Look for the serial example in the Arduino code it will he...