[DISCUSSION] Hardware Feature Requests

A place to talk about all the Operating Systems, Software & Hardware
Forum rules

- Posts are to be made in the relevant forum. Users are asked to read the forum descriptions before posting.

- Members should post in a way which is consistent with "normal writing". That is users should not post excessive numbers of emoticons, large, small or coloured text, etc. Similarly users should not SHOUT or use excessive punctuation (e.g. ! and ?) in topic titles or posts.

- Members should use an appropriate, descriptive subject when posting a new topic. Examples of bad subjects include; "Help me!", "I'm stuck!", "I've got an error!", etc. Examples of good subjects include; "Getting an TABLE FULL error upon login", "Cannot restore a backup".

- Members are asked to post in English only so that posts can be well received and properly monitored.

- Spam is not tolerated here under any circumstance. This includes offering hosting services (charged and free), installation services, solicitation etc. Recruiting members for your own projects (moderators, designers, professional MOD work, etc.) is not permitted and is also considered spam. Users posting spam will be warned and their post removed.

- Members should post in a way that is respectful of other users. Flaming or abusing users in any way will not be tolerated and will lead to a warning. Vulgar language and inappropriate material is not allowed and will be removed. We try to maintain a family friendly atmosphere whenever it is possible within the main subject matter of this community. Please keep this in mind when participating.

- Each user is allowed to create one account. If you would like to change your username, please contact us and, most likely, we can do it for you while you can keep all of your profile data, posts, and other content.

- If a user violates our guidelines and shows a disregard for them, our staff and our community, they run the risk of losing their account. We reserve the right to deactivate any account and to edit or remove any content without warning. These guidelines are subject to change at any time without notice.

Thank you for visiting LattePanda.com!
Post Reply
User avatar
Site Admin
Posts: 2696
Joined: Wed Jan 20, 2016 9:09 am

Fri Jul 29, 2016 10:59 am

We are overwhelmed with feedback for the V1 LattePanda. We would love to hear what you think should be included in the V2 LattePanda. What do you like about the current board? What do you hate about it? Give us your suggestions, let it all out...
Enjoy Tinkering with LattePanda ! :lol:

User avatar
Posts: 3
Joined: Wed Jul 27, 2016 3:03 pm

Fri Jul 29, 2016 11:53 am

The current board is great for the price, but if possible it would be great to have a little bit more power, perhaps a beefier gpu, if possible. There again this can cause heat issues - the current board does run pretty hot after a while. An integrated heatsink / fan (or at least a way to mount one securely) on the next version would be great. Bonus points if the fan is PWM controllable to keep it quiet on idle :)

User avatar
Posts: 214
Joined: Mon Apr 18, 2016 4:30 am
Location: Germany, NRW

Fri Jul 29, 2016 3:21 pm

As first I think it is impossible to fulfill all wishes in one product. Perhaps you should divide the product line into private and professional customers.

I am writing here now as a professional development engineer. I develop devices with a lot size of nearly 1000 units per year. That is not enough for an own design but we need the flexibility of a small single PCB like the LattePanda.

What we need additional :
LCD : For the maximum flexibility of LCD sizes a 24Bit-RGB connector. As a pin connector, not FPC. Also pin connector for I2C touch. Capacity touch, not resistance.
5 & 10 inch LCD with your connector and touch option and mounting frame for all sizes

At least one free COM-Port, selectable as RS232 or RS485

Power : Configurable power system. If LiPo battery connected with charge option.
Selectable behavior at
Power On (connecting main power) :
- do nothing and wait for button
- start automatic
Power Off :
- "Off"
- LiPo-Power for shutting down windows and PCB in a few seconds
- or still running vom battery like a Laptop.
Own power regulator with wide range of input voltage 7V < Vin < 26V (12V and 24V are standards) and input filters.

Configurable Boot-Logo and fast as possible showing this Logo at Power on ( < 200ms).

Pin-Connector (flat cable!) for Buttons and signaling LEDs for power sequence. With external power LEDs no need for fast boot logo :)

Valid Win10-Licence für bigger systems. I dont want to struggle with Microsoft... you can do this for me.

Audio amplifier with a little bit more power for external speakers, not headphones. But Mono would be enough for us.
Maybe a connector for a microphone ?

BIOS controlled standard pwm fan connector

All connectors with same height (for additional PCBs) and we prefer 0,1inch spacing

LAN : Additional connector with the signals of LAN-LEDs. In most devices you need the PC (with LCD) at the front, but the LAN connector at the rear. You can use some LAN extension, but the signs of the LAN LEDs are lost.

CE-sign and confirmation document

What I not need :
More processor power. If it can play some videos and do some easy calculation für controlling my devices its enough. At the moment its enough processor power.

Sorry, but : The Arduino. At the first moment I thought it is a great idea to have a separate microcontroller onboard. But now I again prefer my own controllers on my own PCBs.


What we still need :
WiFi & Bluetooth
2-3 USB

User avatar
Posts: 88
Joined: Sat Apr 16, 2016 7:14 pm

Mon Aug 01, 2016 5:43 am

For me There are some nice to haves:
- GBe connection
- a PMIC with lipo/li-ion control
- a Bios controlled fan port with options to place and fix a heatsink and fan
- a sdd/hdd connection (e.g. data or m2)
- more documentation on pcb layout
- more documentation on how to program the I/o connected to the atom and how to use the Arduino side under windows

User avatar
Posts: 12
Joined: Tue May 24, 2016 3:15 am

Mon Aug 01, 2016 6:08 am

Auto BIOS recovery should be included which nowadays most of the PC motherboard included especially ASUS mobo.

BIOS bricked is 1 of the Lattepanda major cause the backer request RMA now in this forum.

As a development board many user will have to touch the BIOS whether they prefer or not. Without a safety measure liked auto BIOS recovery Lattepanda should called a mini PC motherboard not a development board where users are not recommended to touch the bios.

User avatar
Site Admin
Posts: 2696
Joined: Wed Jan 20, 2016 9:09 am

Mon Aug 01, 2016 8:22 am

great suggestions, keep them coming!
Enjoy Tinkering with LattePanda ! :lol:

User avatar
Posts: 13
Joined: Wed Jun 08, 2016 8:03 pm

Mon Aug 01, 2016 10:17 am

Support for UWP :)

User avatar
Posts: 31
Joined: Mon Jun 06, 2016 10:47 am

Mon Aug 01, 2016 2:24 pm

- An easy to build case (I orderd the acryl one but gave up after fiddling around for two hours and breaking some parts). Maybe you can create a pre-build case?
- A case that has enough space for heatsinks and fans.
- Build-in option for attaching a fan that is perhaps controlled by the LP itself. The Hardkernel guys have this in their Odroid-Mini-Computers. The Odroid seems to be measuring the temperature itself and then activates the fan.

Well, these were my main problems.

User avatar
Posts: 1
Joined: Mon Aug 01, 2016 7:37 pm

Mon Aug 01, 2016 7:48 pm

- More robust power supply
- Header for power/reset buttons (this is serious flaw of V1!!!)
- Bit faster eMMC storage if possible (I have 4G version and storage is serious bottleneck for Win10)

Not really related to V2 but it would be nice to have aluminium case which will work as cooler. Maybe with optional frame for display...

User avatar
Posts: 88
Joined: Sat Apr 16, 2016 7:14 pm

Wed Aug 03, 2016 1:33 pm

Headers for power and reset buttons, you sir are a genius. That would be great to have.

Post Reply