Stop Windows Audio Reset to 30% on Boot

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    thegrinch
    Posts: 2
    Joined: Wed Nov 07, 2018 7:04 pm

    Wed Nov 07, 2018 7:53 pm

    Hi, I'm working on an audio project using the latte panda. The idea is for the project to work headless.

    Everything is working great, except for the fact that the Windows 10 OS running on the LattePanda resets it's output volume slider to 30% whenever it boots up. (I've already tried the obvious way to fix this by adjusting volume in the system settings: https://uknowit.uwgb.edu/page.php?id=78909, no dice!) This makes my project super quiet until I go in and manually turn up the volume.

    How do I fix this?

    User avatar
    LattePanda
    Site Admin
    Posts: 2661
    Joined: Wed Jan 20, 2016 9:09 am

    Wed Nov 21, 2018 9:30 pm

    Enjoy Tinkering with LattePanda ! :lol:

    User avatar
    thegrinch
    Posts: 2
    Joined: Wed Nov 07, 2018 7:04 pm

    Mon Dec 03, 2018 10:29 pm

    LattePanda wrote:
    Wed Nov 21, 2018 9:30 pm
    Try this - https://www.lattepanda.com/topic-f10t16670.html
    The solution suggested here works. However, I just gotta say that it's pretty heinous that windows requires you to download 3rd party software to make such a simple adjustment :evil: :evil: :evil:

    User avatar
    LattePanda
    Site Admin
    Posts: 2661
    Joined: Wed Jan 20, 2016 9:09 am

    Tue Dec 04, 2018 8:26 am

    thegrinch wrote:
    Mon Dec 03, 2018 10:29 pm
    LattePanda wrote:
    Wed Nov 21, 2018 9:30 pm
    Try this - https://www.lattepanda.com/topic-f10t16670.html
    The solution suggested here works. However, I just gotta say that it's pretty heinous that windows requires you to download 3rd party software to make such a simple adjustment :evil: :evil: :evil:
    =. =...Um...I am not sure if it's Windows faulty... :shock:
    Enjoy Tinkering with LattePanda ! :lol:

    Post Reply