LattePanda Alpha 864 ethernet and usb Probs

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    Selyria
    Posts: 6
    Joined: Thu Oct 25, 2018 6:20 pm

    Sat Dec 01, 2018 11:31 pm

    I have several problems with my Lattepanda Alpha 864

    My problems are in downloading and uploading over the internet but not over the network see pictures the problems disappear if I have a high CPU load. But if I don't have a CPU load I can only download super slow.

    My external hard disk is sometimes recognized and then again not that goes so back and forth. If it is recognized once and I want to transfer a few gigabytes it is aborted because the hard disk is thrown out. Is only at the Lattepanda so at the Pc everything okay 200 Gigabyte transfer no problems.

    What I have already tried

    Windows reinstalled
    Ethernet cable exchanged
    Driver reinstalled
    Power Saving Mode Off (Maximum Power)

    I have a feeling my lattepanda is starting to fail.

    Pls help I don't know anymore
    Attachments
    Download prob.png
    Download prob.png (1.61 MiB) Viewed 1043 times
    Download prob2.png
    Download prob2.png (1.58 MiB) Viewed 1043 times

    Post Reply