Cannot re-install Windows

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    ericle75
    Posts: 1
    Joined: Thu Dec 14, 2017 8:00 pm

    Thu Dec 14, 2017 8:02 pm

    Hi. I have a big problem with my LP 4/64. I had to reinstall the operating system with W10. I have downloaded the image corresponding to the model of my motherboard (S70CR110 C45B / Z8300) with this image: x64 version for z8300 4GB + 64GB.

    The installation is done correctly, but in the first Windows startup I get the following message: "Windows could not complete the installation. To install Windows on this computer, restart the installation". I've already repeated the process a dozen times.

    Can someone give me a hand?

    Thanks.

    User avatar
    leogx9r
    Posts: 36
    Joined: Tue Dec 05, 2017 1:09 pm

    Fri Dec 15, 2017 3:44 am

    Perhaps the installation file you downloaded was corrupted. Try downloading it again.

    User avatar
    LattePanda
    Site Admin
    Posts: 2661
    Joined: Wed Jan 20, 2016 9:09 am

    Fri Dec 15, 2017 8:41 am

    Hi, maybe it is the problem with the system documents, could you please share a picture of the "message"? :)
    Enjoy Tinkering with LattePanda ! :lol:

    User avatar
    Speedlimits
    Posts: 3
    Joined: Sun Dec 30, 2018 2:55 pm

    Sun Dec 30, 2018 3:14 pm

    I have the same issue.
    During reinstall it stopped with a message.
    I will send a screenshot of the message.

    User avatar
    Speedlimits
    Posts: 3
    Joined: Sun Dec 30, 2018 2:55 pm

    Sun Dec 30, 2018 3:15 pm

    Speedlimits wrote:
    Sun Dec 30, 2018 3:14 pm
    I have the same issue.
    During reinstall it stopped with a message.
    I will send a screenshot of the message.
    How can it be corrupted if it’s a zip file ;)

    Post Reply