Red light blinking. NO signal HEEEELP

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    neeeeds
    Posts: 3
    Joined: Fri May 13, 2016 3:42 pm

    Tue Jun 07, 2016 7:22 pm

    Hi Lattepanda team. a week ago i've received my LP and when i first opened it i noticed that the restart button is damaged no press mecanisme. And when i booted up my Unit. the red LEd will not stop blinking and i get no signal on my monitor or any sign of a working unit.
    So what should i do ?
    i tested different PS and cables combination nothing changed, i believe that it is because of the faulty restart button.
    https://drive.google.com/open?id=0B-P2g ... 3dVZFJETFU

    What should i do ?

    User avatar
    LattePanda
    Site Admin
    Posts: 2707
    Joined: Wed Jan 20, 2016 9:09 am

    Tue Jun 14, 2016 3:32 am

    Hi,
    I think you are right.
    If the Restart button keep press or broken like your's,the red LED will blink like you description.
    There are two possible solutions
    1. weld a new button which can buy in local ,please be careful the tiny element beside。
    2. ship back to us and we will repair it for you,please email to techsupport@lattepanda.com first and we will give some tips about how to return this board to us
    Enjoy Tinkering with LattePanda ! :lol:

    Post Reply