How to Enable Auto Power On

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    CASEYSCALF
    Posts: 6
    Joined: Tue Apr 07, 2020 7:42 pm

    Fri Sep 11, 2020 7:57 pm

    I know this has been posted before. I read them all and the posts are not clear as to exactly how you enable auto-power on.

    https://www.lattepanda.com/topic-f6t1747.html

    Lets settle this once and for all with easy, actionable steps so others can have success with your product.

    1) This is the board I bought. LattePanda - a Powerful Windows 10 Mini PC 4GB/64GB with Enterprise License - LattePanda V1.0 Edition.

    https://www.amazon.com/gp/product/B073Z ... UTF8&psc=1

    2) How do you enable the auto power on with this model in particular?

    I see a lot of talk about flashing a USB stick with a new BIOS and almost all of the forums show people are having a lot of problems with this. There are multiple varieties of BIOS, it is not clear which one goes with which (for instance my LattePanda does not have an identifying sticker on the side so I have no idea which one I am supposed to choose).

    https://github.com/LattePandaTeam/Latte ... aster/Bios

    3) Using the images attached to this post and the listing on Amazon what model is this?

    4) Do I really need to set something in the BIOS? Can I not change this from the desktop?

    5) Are there any other ways to do this?

    Thank you for any tips!

    Images:

    https://photos.app.goo.gl/D7idJJ4YNNYY32SE6
    https://photos.app.goo.gl/AmdpCaxFD6YiPXiA8
    https://photos.app.goo.gl/hZ1n8g4KCjt9GWUF9

    User avatar
    CASEYSCALF
    Posts: 6
    Joined: Tue Apr 07, 2020 7:42 pm

    Fri Sep 11, 2020 8:32 pm

    SOLVED.

    Forget trying to hold the ESC key it probably won't work as reported elsewhere.

    Instead, type in "BIOS" in the start menu. Go through the prompts to restart to change advanced settings.

    Then find the edit UEFI Firmware. It will then boot into BIOS.

    Still not sure why this is not used as the example for how to do it. One could easily get lost trying to flash on new BIOS and then inadvertently brick their device.

    This was is much easier and safer.

    Post Reply