Does not boot into Windows 10

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    clouditnow
    Posts: 2
    Joined: Thu Aug 25, 2016 5:08 pm

    Thu Aug 25, 2016 5:26 pm

    I just received my Latte panda today 8/25/16 , connected it up and the same thing happens, it powers up, boot to a latte panda screen, then does not load into Windows 10. The unit then shuts off. Can anyone help?

    User avatar
    Boring
    Posts: 88
    Joined: Sat Apr 16, 2016 7:14 pm

    Thu Aug 25, 2016 6:39 pm

    Did you buy one with Windows 10 pre installed. As I understand now some boards get shipped without Windows 10.

    I believe 32GB/2GB is sold with and 64GB/4GB without.

    User avatar
    LattePanda
    Site Admin
    Posts: 2555
    Joined: Wed Jan 20, 2016 9:09 am

    Mon Aug 29, 2016 3:59 am

    clouditnow wrote:I just received my Latte panda today 8/25/16 , connected it up and the same thing happens, it powers up, boot to a latte panda screen, then does not load into Windows 10. The unit then shuts off. Can anyone help?
    the lattepanda screen you are seeing is the bios, so this seems functional
    the system is attempting to boot but it sounds like something has corrupted.
    reflashing the system may fix the problem. please see here under "How do I re-install LattePanda Windows system?" http://www.lattepanda.com/docs/
    Be sure to download the corresponding image to your system architechture (lp standard x86, lp enhanced x64)
    post results

    hope this helps
    Enjoy Tinkering with LattePanda ! :lol:

    Post Reply