Driver Issue - Not possible to use DSLR - WIN 10

If you're having trouble with your LattePanda, here's the place to get help.
Forum rules
    Post technical issues here.

    - Discussion tone should be kept polite and focused on facts
    - Vulgar language or flaming constitutes an instant ban
    - Please note we cannot support PM requests for help
    - Members are asked to post in English only so that posts can be well received and properly monitored
    - You can find the RMA guide [here]
    - Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:


    - Have you tried a hard reset?
    - Are you using a 5V@2A+ power supply and a high quality USB cable?
    - Have you tried powering the board through the CN2 headers?
    - Have you tried a cooling solution such as a fan or heatsink?
    - Have you tried reinstalling drivers?
    - Have you tried reloading the operating system?
    - Have you tried flashing the BIOS?
    - Are you able to flash the BIOS at the hardware level?

    If you have not found a solution, post a new issue. To speed up the process please let us know:
    - Have you tried the solutions listed above?
    - What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
    - Have you tried any other solutions?
    - How long have you had your board for?
    - When did you first boot your board?
    - Did it work ok before the issue occurred or has the issue always been there?
    - Use images and videos to help us understand the issue where possible

    If you are seeking RMA:
    - Please open a new topic rather than hijacking someone else's thread
    - Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
    - Completed RMA cases will be marked with [CLOSED]
    You can find the RMA guide [here]

    Resolved Issues
    - If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
    - If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.

    What does troubleshooting support?
    - Hardware queries
    - Hardware issues that weren’t caused by you, e.g DOA board
    - Windows 10 specific issues
    Post Reply
    User avatar
    mario
    Posts: 3
    Joined: Tue Aug 30, 2016 12:33 pm

    Wed Aug 31, 2016 5:48 pm

    Hello,
    i spent some time getting the lattepande with windows 10 to recognize my canon DSLR Camera, but there is always a no "driver found" message - canon does not provide driver as the cameras are supposed to be recognized by the operating system.... :(
    anybody successfully used a dslr on the panda?

    Mario

    User avatar
    Boring
    Posts: 88
    Joined: Sat Apr 16, 2016 7:14 pm

    Wed Aug 31, 2016 7:08 pm

    Mario,

    for me it just works fine. I didn't get a message it was connected, but it shows up in the windows explorer screen.

    I have attached a screenshot.
    Attachments
    Canon400DonLP.png
    Canon400DonLP.png (82.9 KiB) Viewed 3841 times

    User avatar
    LattePanda
    Site Admin
    Posts: 2555
    Joined: Wed Jan 20, 2016 9:09 am

    Fri Sep 02, 2016 8:45 am

    mario wrote:Hello,
    i spent some time getting the lattepande with windows 10 to recognize my canon DSLR Camera, but there is always a no "driver found" message - canon does not provide driver as the cameras are supposed to be recognized by the operating system.... :(
    anybody successfully used a dslr on the panda?

    Mario
    it should be able to work out of the box as with a normal windows 10 pc. are you connecting with a USB a-b cable?
    Is there a setting to turn your camera to mtp mode so it can be recognized as a mass storage device?
    Enjoy Tinkering with LattePanda ! :lol:

    User avatar
    mario
    Posts: 3
    Joined: Tue Aug 30, 2016 12:33 pm

    Mon Sep 05, 2016 11:18 am

    i reinstalled the system and it all works now - thanks!

    User avatar
    Boring
    Posts: 88
    Joined: Sat Apr 16, 2016 7:14 pm

    Mon Sep 05, 2016 6:41 pm

    Good to hear that it is working

    User avatar
    LattePanda
    Site Admin
    Posts: 2555
    Joined: Wed Jan 20, 2016 9:09 am

    Tue Sep 06, 2016 2:46 am

    mario wrote:i reinstalled the system and it all works now - thanks!
    glad to hear, feel free to post your project here on the forum!
    Enjoy Tinkering with LattePanda ! :lol:

    Post Reply