Hello,
After some time of illness, I finally opened the box (and other just like this (Pine64)), yeah!
But, I can not find the pre-installed OS anywhere... It was my understanding it should be included... or?
Cheers.
Pledge:
*LattePanda (4G/64GB) Enhanced verison
*7” IPS 1024x600 Display
*7” Cap Touch Panel
*HDMI Cable
*Micro USB Cable
*USB Adapter
No Windows OS in package!?
Forum rules
- Discussion tone should be kept polite and focused on facts
- Vulgar language or flaming constitutes an instant ban
- Please note we cannot support PM requests for help
- Members are asked to post in English only so that posts can be well received and properly monitored
- You can find the RMA guide [here]
- Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:
- Have you tried a hard reset?
- Are you using a 5V@2A+ power supply and a high quality USB cable?
- Have you tried powering the board through the CN2 headers?
- Have you tried a cooling solution such as a fan or heatsink?
- Have you tried reinstalling drivers?
- Have you tried reloading the operating system?
- Have you tried flashing the BIOS?
- Are you able to flash the BIOS at the hardware level?
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible
If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]
Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
What does troubleshooting support?
- Hardware queries
- Hardware issues that weren’t caused by you, e.g DOA board
- Windows 10 specific issues
- Discussion tone should be kept polite and focused on facts
- Vulgar language or flaming constitutes an instant ban
- Please note we cannot support PM requests for help
- Members are asked to post in English only so that posts can be well received and properly monitored
- You can find the RMA guide [here]
- Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:
- Have you tried a hard reset?
- Are you using a 5V@2A+ power supply and a high quality USB cable?
- Have you tried powering the board through the CN2 headers?
- Have you tried a cooling solution such as a fan or heatsink?
- Have you tried reinstalling drivers?
- Have you tried reloading the operating system?
- Have you tried flashing the BIOS?
- Are you able to flash the BIOS at the hardware level?
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible
If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]
Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
What does troubleshooting support?
- Hardware queries
- Hardware issues that weren’t caused by you, e.g DOA board
- Windows 10 specific issues
- Eric Kazer
- Posts: 9
- Joined: Tue Sep 20, 2016 1:08 am
OS pre-installed on the device already. Just plug in the lattepanda to power, wait for light to st flashing, red light to go black, hold the power button til red light comes on. the latte panda should boot to Windows OS. The OS is already put on the device.
- LattePanda
- Site Admin
- Posts: 2690
- Joined: Wed Jan 20, 2016 9:09 am
This is correct, the OS is preinstalled on the device. Power on and it will go through all the necessary steps.
Enjoy Tinkering with LattePanda ! 
