Help me please lattepanda alpha damage

If you're having trouble with your LattePanda Alpha & Delta, here's the place to get help.
Forum rules
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible

If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]

Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
User avatar
ccs_hello
Posts: 589
Joined: Sat Oct 13, 2018 9:16 pm

Tue Jun 04, 2019 3:12 am

Sorry, I am running out of ideas.

User avatar
SixSixSevenSeven
Posts: 25
Joined: Sun Sep 04, 2016 7:27 pm

Tue Jun 04, 2019 6:45 am

As I did before. You've also so catastrophically damaged the diode next to it that it's blown clear off the pads. Which in turn means you have probably damaged many other components. It is at the point where if it came in to my companies support department, we wouldn't even attempt repair, the amount we pay people to diagnose the issue and repair the fault would be more than just exchanging the device.

User avatar
LattePanda
Site Admin
Posts: 2578
Joined: Wed Jan 20, 2016 9:09 am

Thu Jun 13, 2019 9:25 am

Hi baalwy, we suggest you ship the board back to us, and we will help check if it can be repaired. please contact our technical support(techsupport@lattepanda.com) and attach this post.
Enjoy Tinkering with LattePanda ! :lol:

User avatar
baalwy
Posts: 8
Joined: Fri Jan 25, 2019 9:11 pm

Thu Jun 13, 2019 8:34 pm

LattePanda wrote:
Thu Jun 13, 2019 9:25 am
Hi baalwy, we suggest you ship the board back to us, and we will help check if it can be repaired. please contact our technical support(techsupport@lattepanda.com) and attach this post.
I buy it by www.mouser.in/
and the company received to me in India
How to ship directly to your company
I'm really disappointed.

Post Reply