[DEFECTIVE] Lattepanda Alpha can't boot and no LED light

If you're having trouble with your LattePanda Alpha & Delta, here's the place to get help.
Forum rules
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible

If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]

Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
Post Reply
User avatar
rm1138
Posts: 1
Joined: Thu Apr 16, 2020 6:47 am

Thu Apr 16, 2020 5:37 pm

I just receive my Lattepanda Alpha 800s this morning, when I first power on it, the red led turned on for few second and it goes off.
After that I tried to power it again and nothing happen, no led, no fan.
I tried different ways like resetting the board, flashing the BIOS, power it through the 12v header, but none of them is working.

Post Reply