LattePanda Delta Not Booting

If you're having trouble with your LattePanda Alpha & Delta, here's the place to get help.
Forum rules
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible

If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]

Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
Post Reply
User avatar
NileEllis
Posts: 2
Joined: Sun Aug 23, 2020 8:56 pm

Sun Aug 23, 2020 9:07 pm

Good afternoon,

I very recently purchased a Latte Panda Delta version S70GR200. I was able to plug it in and run it once and it shutdown during running and now I am not able to boot the device again. There is no display through the HDMI output so I cannot see the BIOS if it is still working.

Are there troubleshooting methods that I can follow somewhere? I see that in the forum rules it says "Have you tried the solutions listed above?" but I see not solutions listed to try.

The device turns on, the red light flashes a few times and then the red light remains on and the blue light flashes. when I hold the power button for 3 sec the blue light goes solid but nothing happens after that and it goes back to solid red light and flashing blue light.

Any help would be appreciated.

User avatar
LattePanda
Site Admin
Posts: 2642
Joined: Wed Jan 20, 2016 9:09 am

Mon Aug 24, 2020 9:34 am

pls try removing RTC battery and boot up. Have you changed any settings before it can't boot?
Enjoy Tinkering with LattePanda ! :lol:

User avatar
ccs_hello
Posts: 623
Joined: Sat Oct 13, 2018 9:16 pm

Mon Aug 24, 2020 1:12 pm

@ OP

The LED flash pattern fits exactly the situation that you don't have a bootable device (or no longer bootable).
Multiple possible reasons such as BIOS settings coruppted, drive needs to be reseated, etc. etc.

User avatar
NileEllis
Posts: 2
Joined: Sun Aug 23, 2020 8:56 pm

Mon Aug 24, 2020 10:54 pm

Hi, again.

Thank you very much for the insight! Removing the on board battery for 10min while it is powered down and reinserting the battery then powering the board on seems to corrected to issue, I have successfully booted the pre-installed windows 10 image.

I greatly look forward to working with this SBC.

Edit: I had not changed any of the BIOS settings

User avatar
calpin
Site Admin
Posts: 46
Joined: Fri Apr 15, 2016 9:21 am

Mon Sep 14, 2020 10:34 am

NileEllis wrote:
Mon Aug 24, 2020 10:54 pm
Hi, again.

Thank you very much for the insight! Removing the on board battery for 10min while it is powered down and reinserting the battery then powering the board on seems to corrected to issue, I have successfully booted the pre-installed windows 10 image.

I greatly look forward to working with this SBC.

Edit: I had not changed any of the BIOS settings
Try the latest Delta bios, for the most stable system :P

https://github.com/LattePandaTeam/Latte ... 0-Software

Post Reply