I already followed the below link from GitHub to update the bios:
https://github.com/LattePandaTeam/Latte ... 20power-on
The problem is the machine can be auto power on but it took a very long time to boost from screen ( LattePanda icon) into the OS (about 5-10 miniutes).
I think the Latte panda team should update the BIOS for Delta (S70GR200).
The Version S70GR1100 is OK but S709GR200 is not OK.
Latte Panda Delta version S70GR200 Auto Power On Problem
-
LattePanda
- Site Admin
- Posts: 2689
- Joined: Wed Jan 20, 2016 9:09 am
thanks for your feedback, we will arrange test and report it to our team.
Enjoy Tinkering with LattePanda ! 
I have a different issue. I did not let this go that long, but after flashing with the GR200 auto power on my Delta hangs at A0. If I then use the power switch on the side it powers up with no issues. Would anyone know what can be done to correct this?
I have flashed it twice thinking there might be something that went wrong in the initial flash, but there was no change.
I have flashed it twice thinking there might be something that went wrong in the initial flash, but there was no change.
-
LattePanda
- Site Admin
- Posts: 2689
- Joined: Wed Jan 20, 2016 9:09 am
We've tested GR200 auto power on and the booting time is about 5sec. Pls try updating GR200 default BIOS and see if it helps.tangochuynam wrote: ↑Wed Nov 18, 2020 1:50 amI already followed the below link from GitHub to update the bios:
https://github.com/LattePandaTeam/Latte ... 20power-on
The problem is the machine can be auto power on but it took a very long time to boost from screen ( LattePanda icon) into the OS (about 5-10 miniutes).
I think the Latte panda team should update the BIOS for Delta (S70GR200).
The Version S70GR1100 is OK but S709GR200 is not OK.
https://github.com/LattePandaTeam/Latte ... 20power-on
Enjoy Tinkering with LattePanda !
-
LattePanda
- Site Admin
- Posts: 2689
- Joined: Wed Jan 20, 2016 9:09 am
sorry, could you pls explain the issue in more detail?dablitz1 wrote: ↑Tue Nov 24, 2020 1:34 pmI have a different issue. I did not let this go that long, but after flashing with the GR200 auto power on my Delta hangs at A0. If I then use the power switch on the side it powers up with no issues. Would anyone know what can be done to correct this?
I have flashed it twice thinking there might be something that went wrong in the initial flash, but there was no change.
Enjoy Tinkering with LattePanda !