Hello,
I am following your tutorial and it is very good explained.
When i want to erase the chip a get this message
Possible protection is enabled. Press "Unprotect" and check datasheet
Erasing memory...
Do you know what is the cause.
Thank you.
[TUTORIAL] LattePanda Bios Reflash Save LP from red light
Forum rules
- Posts are to be made in the relevant forum. Users are asked to read the forum descriptions before posting.
- Members should post in a way which is consistent with "normal writing". That is users should not post excessive numbers of emoticons, large, small or coloured text, etc. Similarly users should not SHOUT or use excessive punctuation (e.g. ! and ?) in topic titles or posts.
- Members should use an appropriate, descriptive subject when posting a new topic. Examples of bad subjects include; "Help me!", "I'm stuck!", "I've got an error!", etc. Examples of good subjects include; "Getting an TABLE FULL error upon login", "Cannot restore a backup".
- Members are asked to post in English only so that posts can be well received and properly monitored.
- Spam is not tolerated here under any circumstance. This includes offering hosting services (charged and free), installation services, solicitation etc. Recruiting members for your own projects (moderators, designers, professional MOD work, etc.) is not permitted and is also considered spam. Users posting spam will be warned and their post removed.
- Members should post in a way that is respectful of other users. Flaming or abusing users in any way will not be tolerated and will lead to a warning. Vulgar language and inappropriate material is not allowed and will be removed. We try to maintain a family friendly atmosphere whenever it is possible within the main subject matter of this community. Please keep this in mind when participating.
- Each user is allowed to create one account. If you would like to change your username, please contact us and, most likely, we can do it for you while you can keep all of your profile data, posts, and other content.
- If a user violates our guidelines and shows a disregard for them, our staff and our community, they run the risk of losing their account. We reserve the right to deactivate any account and to edit or remove any content without warning. These guidelines are subject to change at any time without notice.
Thank you for visiting LattePanda.com!
- Posts are to be made in the relevant forum. Users are asked to read the forum descriptions before posting.
- Members should post in a way which is consistent with "normal writing". That is users should not post excessive numbers of emoticons, large, small or coloured text, etc. Similarly users should not SHOUT or use excessive punctuation (e.g. ! and ?) in topic titles or posts.
- Members should use an appropriate, descriptive subject when posting a new topic. Examples of bad subjects include; "Help me!", "I'm stuck!", "I've got an error!", etc. Examples of good subjects include; "Getting an TABLE FULL error upon login", "Cannot restore a backup".
- Members are asked to post in English only so that posts can be well received and properly monitored.
- Spam is not tolerated here under any circumstance. This includes offering hosting services (charged and free), installation services, solicitation etc. Recruiting members for your own projects (moderators, designers, professional MOD work, etc.) is not permitted and is also considered spam. Users posting spam will be warned and their post removed.
- Members should post in a way that is respectful of other users. Flaming or abusing users in any way will not be tolerated and will lead to a warning. Vulgar language and inappropriate material is not allowed and will be removed. We try to maintain a family friendly atmosphere whenever it is possible within the main subject matter of this community. Please keep this in mind when participating.
- Each user is allowed to create one account. If you would like to change your username, please contact us and, most likely, we can do it for you while you can keep all of your profile data, posts, and other content.
- If a user violates our guidelines and shows a disregard for them, our staff and our community, they run the risk of losing their account. We reserve the right to deactivate any account and to edit or remove any content without warning. These guidelines are subject to change at any time without notice.
Thank you for visiting LattePanda.com!
-
LattePanda
- Site Admin
- Posts: 2690
- Joined: Wed Jan 20, 2016 9:09 am
Hi guadalupeescoto,
could you please take a pic of this message? we don't have this problem always.
did you connect power when reflashing? Please disconnect it if you do.
could you please take a pic of this message? we don't have this problem always.
did you connect power when reflashing? Please disconnect it if you do.
Enjoy Tinkering with LattePanda ! 
I have the same issue. I tried with both ASProgrammer and the CH341A program. I have tried reading the contents of the bios multiple times, and I get different results, so my guess something is getting corrupted somewhere (or maybe a bad chip?).
On AsProgrammer, I get the following error:
For the other program, I took a screenshot.
On AsProgrammer, I get the following error:
Code: Select all
Программатор SPI, I2C, Microwire FLASH/EEPROM v1.4.1
http://forum.easyelectronics.ru/viewtopic.php?f=17&t=10947
asprogrammer@inbox.ru
Current programmer: CH341
10:24:29
Possible protection is enabled. Press "Unprotect" and check datasheet
Erasing memory...
Done
Execution time: 0:00:00
Current programmer: CH341
10:27:27
Possible protection is enabled. Press "Unprotect" and check datasheet
Erasing memory...
Done
Execution time: 0:00:00
Current programmer: CH341
10:27:45
Possible protection is enabled. Press "Unprotect" and check datasheet
Erasing memory...
Done
Execution time: 0:00:00
Current programmer: CH341
Old SREG: 00100000(0x20), 10101010(0xAA)
New SREG: 01010101(0x55), 01000101(0x45)
Current programmer: CH341
Old SREG: 10100000(0xA0), 00010001(0x11)
New SREG: 10101010(0xAA), 01010101(0x55)
- Attachments
-
- error 1.png (119.05 KiB) Viewed 13577 times
Buongiorno ho seguito la guida ma non riesco a leggere L'IC. nel mio caso la sigla è
25LQ64CVIG. ho erronaemente con win10 funzionante aggiornato il bios con un file errato. risultato al riavvio led blue e rosso. ho acquistato il programmatore ma non vuole saperne di funzionare. mi dice chip connesso legge ma i risultati sono tutti F. ho una tlro minipc funzionante con il medesimo chip ...ho provato anche quello ma nulla. parlo da ingnorante ...forse non è compatibile essendo un ic con sigle differente?
25LQ64CVIG. ho erronaemente con win10 funzionante aggiornato il bios con un file errato. risultato al riavvio led blue e rosso. ho acquistato il programmatore ma non vuole saperne di funzionare. mi dice chip connesso legge ma i risultati sono tutti F. ho una tlro minipc funzionante con il medesimo chip ...ho provato anche quello ma nulla. parlo da ingnorante ...forse non è compatibile essendo un ic con sigle differente?
Try switching the clips (If you use it) around. I found that when I clip on the connector to the programmer a red led lights up. Mess around with your programmer till it works. Also, check if you have the winbond w25q64 chip instead. Hope that helps!janlugt wrote: ↑Fri Nov 08, 2019 6:33 pmI have the same issue. I tried with both ASProgrammer and the CH341A program. I have tried reading the contents of the bios multiple times, and I get different results, so my guess something is getting corrupted somewhere (or maybe a bad chip?).
On AsProgrammer, I get the following error:For the other program, I took a screenshot.Code: Select all
Программатор SPI, I2C, Microwire FLASH/EEPROM v1.4.1 http://forum.easyelectronics.ru/viewtopic.php?f=17&t=10947 asprogrammer@inbox.ru Current programmer: CH341 10:24:29 Possible protection is enabled. Press "Unprotect" and check datasheet Erasing memory... Done Execution time: 0:00:00 Current programmer: CH341 10:27:27 Possible protection is enabled. Press "Unprotect" and check datasheet Erasing memory... Done Execution time: 0:00:00 Current programmer: CH341 10:27:45 Possible protection is enabled. Press "Unprotect" and check datasheet Erasing memory... Done Execution time: 0:00:00 Current programmer: CH341 Old SREG: 00100000(0x20), 10101010(0xAA) New SREG: 01010101(0x55), 01000101(0x45) Current programmer: CH341 Old SREG: 10100000(0xA0), 00010001(0x11) New SREG: 10101010(0xAA), 01010101(0x55)
- Attachments
-
- image3.jpeg (2.7 MiB) Viewed 4659 times
-
- image4.jpeg (2.55 MiB) Viewed 4659 times
I suggest you use AsProgrammer on win10 and use gd25q64. Check to make sure you have good connections. If you have a clip with your programmer ^^^Look at my previous post^^^, make sure that all of your connections are good. It should have a red light if the IC is still connected to the board. Make sure you are using the right bios and press erase, then program with the file. If you read afterwards, it shouldn't be all F. If you boot up and it looks like it's working but you get no HDMI picture, read here http://www.lattepanda.com/topic-f10t1175.htmlpaolo977 wrote: ↑Sat Apr 18, 2020 7:13 amBuongiorno ho seguito la guida ma non riesco a leggere L'IC. nel mio caso la sigla è
25LQ64CVIG. ho erronaemente con win10 funzionante aggiornato il bios con un file errato. risultato al riavvio led blue e rosso. ho acquistato il programmatore ma non vuole saperne di funzionare. mi dice chip connesso legge ma i risultati sono tutti F. ho una tlro minipc funzionante con il medesimo chip ...ho provato anche quello ma nulla. parlo da ingnorante ...forse non è compatibile essendo un ic con sigle differente?
