802.11abgn Adapter fails after Windows 10 Creator Update [SOLVED]

userHead nh905 2017-04-11 06:05:26 60216 Views15 Replies
2017/10/26 found driver version 5.93.103.27 at https://drivers.windows10download.com/w ... bit-gjqqk/ that worked

>>>

I recently upgraded my 4GB/64GB LattePanda from Windows 10 Anniversary to Creator. On reboot, the Broadcom 802.11abgn Wireless SDIO Adapter would not start (Code 10). The event log showed that the migrate step failed with Status: 0xC0000719.

I finally figured out how to get the drivers off github (for anyone else, you have to download the entire package from https://github.com/LattePandaTeam/Latte ... 0-Software) but ran into the following error:

Code: Select all

pnputil -i -a bcmfn2.inf Microsoft PnP Utility Processing inf : bcmfn2.inf Failed to install the driver on any of the devices on the system : No more data is available. I did a scan for hardware changes to recreate the WiFi network adapter and then did a driver update pointing to the downloaded LattePanda drivers - the drivers were already installed but the adapter still would not start.

I rolled back to the previous Windows 10 code and WiFi started fine, so the hardware is working. The Driver Details shows a lot more components than what I saw on Creator.

Any suggestions on how to narrow down the problem?