Technical Discussion

Looking for a good way to ground my board, in a thin build.

userHead ehansigno 2022-08-16 21:08:34 101 Views2 Replies

I am working on a build and trying to keep it as thin as possible, without going above 20mm. What recommendations would you have to insulate/ground my board without using standoffs? I’ve read and seen people using a piece of anti static plastic sheeting but can’t find any. Would a silicone sheet work as well?

2022-09-10 18:31:17

I am working on a build and trying to keep it as thin as possible, without going above 20mm. What recommendations would you have to insulate/ground my board without using standoffs? I’ve read and seen people using a piece of anti static plastic sheeting but can’t find any. Would a silicone sheet work as well? https://routerlogin.uno/

 

I got this,...

userHeadPic ehansigno
2022-08-17 15:07:55

Translated with google translator. German English

 

Double-sided tape for mirrors.

But the danger is that the small components on the circuit board will break later when you disconnect them.I would rather use spacers.

https://de.aliexpress.com/item/32539100523.html?spm=a2g0o.productlist.0.0.3c5f67baP8sMk9&algo_pvid=72ed1f22-59ef-4151-9cc3-77a39344b53d&algo_exp_id=72ed1f22-59ef-4151-9cc3-77a39344b53d-1&pdp_ext_f=%7B%22sku_id%22%3A%2259207305570%22%7D&pdp_npi=2%40dis%21EUR%212.18%211.96%211.79%21%21%21%21%402100bddf16607199476958310ead83%2159207305570%21sea&curPageLogUid=HjD0LIqWTViT

userHeadPic ReX1986