Power and reset pins

userHead Damian.Kom 2023-10-05 15:55:51 253 Views1 Replies



We use LatePanda V1 DFR0418 in our device. So far we have had the left-hand version, with the button highlighted in yellow. We soldered goldpins for external power/reset signals in place of the vias above the reset and power buttons. The version marked in red does not have these vias. Is there any place where one can easily solder to with a wire or goldpin? Because the only way we see is to mechanically remove the button and solder in its place.

Translated with www.DeepL.com/Translator (free version)