Hi guys,
In this topic, you can find the solutions of the common problems, hope can help you.
BTW, most of contents here are contributed by LattePanda users! I represent LattePanda product and operation team to say "You guys rock! Enjoy Tinkering!". Thank you so much!
Problems & Solutions
1. Red light all time
2. DFR0418 Activated
3. No HDMI output
4. Touchpanel isn't working
5. Windows Installed when USB boot fails
6. How to fix no output from sound jack and strange symptoms on USB 2.0
7. Refreshing BIOS to save your LattePanda from BIOS error or no display
8. What if my LattePanda always shows recovery mode when first booting
9. 802.11abgn Adapter fails after Windows 10 Creator Update
Documents.
1. LattePanda Win10 Enterprise LTSB Image
2. FCC/CE Confirmation
3. Pin Information
Tutorials
1. System Clone
2. Power the board via CN2 headers
3. Resolution changing
4. How to Custom Boot Logo
5. How to Clone Image
5. How to Clone Image efficiently from one LattePanda to another
6. How to set Windows default voice output volume with script
7. What should we if I forget my Windows password...
Topics
1. Matlab on LattePanda
Continuous update...
LattePanda V1.0: FAQ & Tutorials from great forum contributors!
Forum rules
- Discussion tone should be kept polite and focused on facts
- Vulgar language or flaming constitutes an instant ban
- Please note we cannot support PM requests for help
- Members are asked to post in English only so that posts can be well received and properly monitored
- You can find the RMA guide [here]
- Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:
- Have you tried a hard reset?
- Are you using a 5V@2A+ power supply and a high quality USB cable?
- Have you tried powering the board through the CN2 headers?
- Have you tried a cooling solution such as a fan or heatsink?
- Have you tried reinstalling drivers?
- Have you tried reloading the operating system?
- Have you tried flashing the BIOS?
- Are you able to flash the BIOS at the hardware level?
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible
If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]
Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
What does troubleshooting support?
- Hardware queries
- Hardware issues that weren’t caused by you, e.g DOA board
- Windows 10 specific issues
- Discussion tone should be kept polite and focused on facts
- Vulgar language or flaming constitutes an instant ban
- Please note we cannot support PM requests for help
- Members are asked to post in English only so that posts can be well received and properly monitored
- You can find the RMA guide [here]
- Please check if your question has already been answered before opening a new thread. If it has not, please verify the following:
- Have you tried a hard reset?
- Are you using a 5V@2A+ power supply and a high quality USB cable?
- Have you tried powering the board through the CN2 headers?
- Have you tried a cooling solution such as a fan or heatsink?
- Have you tried reinstalling drivers?
- Have you tried reloading the operating system?
- Have you tried flashing the BIOS?
- Are you able to flash the BIOS at the hardware level?
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible
If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]
Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
What does troubleshooting support?
- Hardware queries
- Hardware issues that weren’t caused by you, e.g DOA board
- Windows 10 specific issues
-
LattePanda
- Site Admin
- Posts: 2697
- Joined: Wed Jan 20, 2016 9:09 am
Enjoy Tinkering with LattePanda ! 
That is so cool thanks a lot for this wonderful piece of content have a look at our Jaipur escort and Jaipur call girl enjoy.
I like your post and all you share with us is up to date and quite informative, I would like to bookmark the page so I can come here again to read you, as you have done a wonderful job.
Jaipur Escorts
Jaipur Escort
Escorts in Jaipur
Escort in Jaipur
Jaipur Escorts Service
Jaipur Escorts
Jaipur Escort
Escorts in Jaipur
Escort in Jaipur
Jaipur Escorts Service