[CLOSED] will not POST Backer 1916
Webobject 2016-11-08 06:24:09 4845 Views9 Replies My wife got me a latte panda for Christmas. I had five hours use out of it and it died. April 28th my wife died of breast cancer after which I gave up trying to get someone to give me a RMA.
If this thing wasn't the last thing my wife ever got for me I'd have binned it long since.
I posted umpteen time times on the Kickstarter about my problem, then I moved to this forum the last post of which was about May 20th. At that time I was told to make a "video" of the problem, I threw my hands in the air and gave up.
My Latte panda has a hardware fault. It will not boot.
- Have you tried a hard reset? -- YES
- Are you using a 5V@2A+ power supply and a high quality USB cable? -- YES
- Have you tried powering the board through the CN2 headers? -- YES
- Have you tried a cooling solution such as a fan or heatsink? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reinstalling drivers? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reloading the operating system? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reflashing the BIOS? -- WON'T BOOT CAN'T GET THAT FAR.
- Are you able to flash the BIOS at the hardware level? -- NO
If you have not found a solution, you may post a new issue. Help us to help you by letting us know:
- Is your board Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)? -- STANDARD
- Have you tried the solutions listed above? YES! YES! YES!
- Have you tried any other solutions? -- EVERYTHING ABOVE
- How long have you had it for? -- APRIL 2016
- When did you first boot it? -- APRIL 2016
- Did it work ok before the issue occured or has the issue always been there? -- YES, IT WORKED FINE FOR FIVE HOURS AFTER WHICH IT FAILED TO BOOT EVERY AGAIN.
At a push i can find all my previous attempts to get this issue resolved and post them. It will mean looking through thousands of posts that have accrued since.
Thanks for looking.
If this thing wasn't the last thing my wife ever got for me I'd have binned it long since.
I posted umpteen time times on the Kickstarter about my problem, then I moved to this forum the last post of which was about May 20th. At that time I was told to make a "video" of the problem, I threw my hands in the air and gave up.
My Latte panda has a hardware fault. It will not boot.
- Have you tried a hard reset? -- YES
- Are you using a 5V@2A+ power supply and a high quality USB cable? -- YES
- Have you tried powering the board through the CN2 headers? -- YES
- Have you tried a cooling solution such as a fan or heatsink? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reinstalling drivers? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reloading the operating system? -- WON'T BOOT CAN'T GET THAT FAR.
- Have you tried reflashing the BIOS? -- WON'T BOOT CAN'T GET THAT FAR.
- Are you able to flash the BIOS at the hardware level? -- NO
If you have not found a solution, you may post a new issue. Help us to help you by letting us know:
- Is your board Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)? -- STANDARD
- Have you tried the solutions listed above? YES! YES! YES!
- Have you tried any other solutions? -- EVERYTHING ABOVE
- How long have you had it for? -- APRIL 2016
- When did you first boot it? -- APRIL 2016
- Did it work ok before the issue occured or has the issue always been there? -- YES, IT WORKED FINE FOR FIVE HOURS AFTER WHICH IT FAILED TO BOOT EVERY AGAIN.
At a push i can find all my previous attempts to get this issue resolved and post them. It will mean looking through thousands of posts that have accrued since.
Thanks for looking.