Slow internet speeds (Both Wifi and Ethernet)

If you're having trouble with your LattePanda Alpha & Delta, here's the place to get help.
Forum rules
If you have not found a solution, post a new issue. To speed up the process please let us know:
- Have you tried the solutions listed above?
- What board are you using? Standard (2GB RAM/32GB eMMC) or Enhanced (4GB RAM/64GB eMMC)?
- Have you tried any other solutions?
- How long have you had your board for?
- When did you first boot your board?
- Did it work ok before the issue occurred or has the issue always been there?
- Use images and videos to help us understand the issue where possible

If you are seeking RMA:
- Please open a new topic rather than hijacking someone else's thread
- Mark RMA posts with [DEFECTIVE] + <helpful description of issue>. We can then approve/disapprove each request
- Completed RMA cases will be marked with [CLOSED]
You can find the RMA guide [here]

Resolved Issues
- If you manage to fix an issue, please share your solution for the good of the community. It could help someone else in future.
- If an issue is resolved the thread should be marked as [RESOLVED]. We can then sticky the thread to help people in future.
Post Reply
User avatar
lolcoolkat
Posts: 1
Joined: Wed Aug 12, 2020 1:42 pm

Wed Aug 12, 2020 1:49 pm

Hi guys, I purchased a Latte Panda 864s recently and I'm disappointed by the internet speeds i'm seeing.. when it said that the device has a Gigabit Ethernet port. I'm only seeing around 100Mbps max on Wifi and the same on Ethernet (no change). Alot of the time though tbh.. I don't even get 50Mbps... very unfortunate :/ Keep in mind.. I have a 400Mbps internet plan.. and it works perfect on all my other devices.. so it's definitely an issue with the Latte Panda.

Image

Any ideas how to fix this? I've been asking around and I guess other people say they were not impressed by the Ethernet speeds too. Please help :(

User avatar
LattePanda
Site Admin
Posts: 2642
Joined: Wed Jan 20, 2016 9:09 am

Thu Aug 13, 2020 4:00 am

Hi there
In Network and Sharing Center you can check the the network status. Make sure the "Speed" in "Properties"->"Advanced“ is set as Auto or 1000M. By the way, you can also check the task manager to see if there other program is using ethernet
Enjoy Tinkering with LattePanda ! :lol:

Post Reply